Text only | Text with Images

CableDataSheet, Cable and Wire Technical Consulting Service

Technical Paper => Standards => Topic started by: Madiyar Menggetu on June 28, 2014, 11:08:12 AM

Title: IEEE 1202-1991: Standard for Flame Testing of Cables
Post by: Madiyar Menggetu on June 28, 2014, 11:08:12 AM
(http://www.youblisher.com/files/publications/155/925271//200x300.jpg)

IEEE 1202-1991: Standard for Flame Testing of Cables

Sponsor
Power Systems Engineering Committee of the Industry Applications Society
Approved March 21, 1991

IEEE Standards Board
Abstract: A test protocol and the performance criteria to determine the flame propagation tendency of cables in a vertical cable tray. It applies to single insulated and multiconductor cables is established. The test consists of exposing cable samples to a theoretical 20 kW (70 000 Btu/hr) flaming ignition source for a 20 min duration. The test facility, test sample requirements, test procedure, and evaluation of results are covered.

Keywords: cable flame testing, cable tray, flame test facility, flame testing of cables

https://law.resource.org/pub/us/cfr/ibr/004/ieee.1202.1991.html
Title: Re: IEEE 1202-1991: Standard for Flame Testing of Cables
Post by: Henrietta Eleanor RACE on January 01, 2023, 08:41:26 PM
xxx (https://law.resource.org/pub/us/cfr/ibr/004/ieee.1202.1991.pdf)
Title: Re: IEEE 1202-1991: Standard for Flame Testing of Cables
Post by: Henrietta Eleanor RACE on January 01, 2023, 08:42:58 PM
xxx (https://nvlpubs.nist.gov/nistpubs/Legacy/TN/nbstechnicalnote1291.pdf)
Title: Re: IEEE 1202-1991: Standard for Flame Testing of Cables
Post by: Henrietta Eleanor RACE on January 01, 2023, 08:46:03 PM
(https://www.cabledatasheet.com/gallery/849_01_01_23_8_45_32.jpeg)
Text only | Text with Images