CableDataSheet, Cable and Wire Technical Consulting Service

The Standard Plastic Extruder Screw

he standard plastic extruder screw typically exhibits the following characteristics:



A Right Thread with Total Length of 20 to 30 D    A Feed Section Length of 4 to 8 D
A Metering Section Length of            6 to 10 D    A Total Number of Parallel Flight Designs of 1
A Flight Helix Angle (Pitch) at the I.D. of 17.66o    A Flight Width of 0.1 D
A Feed Section Channel Depth H of 0.15 to 0.20 D    A Channel Depth Ratio (Compression) of 2 to 4
The vast majority of extruder screws in service today fall within these design approximations.

source : You are not allowed to view links. Register or Login