• Welcome to CableDataSheet, Cable and Wire Technical Consulting Service.

BTC Ibérica S.A.

Started by Andrew caldwell Martin, December 12, 2014, 08:10:55 PM

Previous topic - Next topic

Andrew caldwell Martin

BTC Ibérica S.A.


BTC is a high technology factory leading on the instrumentation cable market because of the Lead Time Delivery and High
Quality Product.

Cables within the BTC range are particularly suitable for Petrochemical Industry, Offshore Industry, Marine Industry, Refining,
Steel Works, Nuclear Power Plants, General Industrial Operations and Special Applications.

What ever the requirements for Instrumentation and Control Cables, we at BTC have the solution.



BTC Ibérica started its business on the 10th of January 2003, located in Zaragoza (Industrial Area MALPICA) on 3.500M² of floor space with a staff of 22 people.
Production consisted on Instrumentation Cables (BS5308) with PE or PVC insulation, aluminium screen, steel wire armour (GSWA) and PVC sheath.
The cable capacity up to 30 pairs and the section up to 2.50mm².
The ISO Certification ISO90001 was established by SGS.


The production range of instrumentation cables is broadened with new materials, such as XLPE insulation and LSZH sheaths.
Incorporation of double steel tape armouring (DSTA) machines.
The Control Cables (BS5467) start to be manufactured. Multi-conductors up to 63 conductors and section 6.0mm².


BTC Ibérica relocates its installations inside Zaragoza (Industrial Area CENTROVIA) on a new plant with 12.000M² of floor space.
Acquisition of lab equipment to carry out tests on fire retardant, according to IEC60332-2-22&IEC60332-2-24.


Start using copper with Mica (MGT) over cores and lab equipment to carry out fire tests according to IEC60331. This way our production is increased with Fire Resistant instrumentation and control cables (EN50288-7&BS6724).


Introduction of elastomeric plastic materials, EPR insulation and SW4 sheath for offshore installations. The production of Rubber cables begins (BS6883&BS7919).
Incorporation of the steel braid armouring (GSWB) machines.
Establishment of the Environmental Certification ISO14001 by TUV.


Nylon (PA12) begins to be used as material for sheathing. It is necessary under the sheath to make the cable resistant to rodents and, together with a layer of aluminium and polythene, for Multi Layer System Cables (AL-HDPE/PA).


Incorporation of a Lead Sheath which provides the cable with qualities against chemical and environmental agents.
It is applied on all type of cables, both instrumentation and control cables.


Acquisition of machines for the production of Telephone Cable (CW1128&CW1198) with Cellular PE insulation and Foam Skin together with Petroleum Jelly Fill (PJF).


Starting of the production of the Power Cable, section up to 35mm² (IEC60502-1).


The whole range of Energy cables is completed and the section of 240mm² reached.
With this result, all the range of low tension products is covered.


Lloyd's approval for cable types BS6883&BS7917 for Marine applications.


Establishment of the Safety and Health OSHAS 18001 Certificate.


Quality Certificate:                        BTC Iberica S.A.s Certificate ISO 9001:2000 No ES 961204.

Enviroment Certificate:                  BTC Iberica S.A.s Certificate ISO 14001:2004 No 3.00.07028

HSE Certificate:                           Under process of Certification.

The Management of BTC IBÉRICA, S.A., company which works in the manufacturing of instrumentation, control and thermocouple compensation cables, defines, assumes and communicates the content of its Management Integrated Policy so as to, in every level, transmit its position relating the quality of its products, its commitment with the environment and pollution prevention.

This policy is supported on a line of action based on the continuous improvement in every aspect and on the prevention of pollution, as well as on the proper assignment of responsibilities to the members of the organization and on the achievement of the following strategic goals