CableDataSheet, Cable and Wire Technical Consulting Service

What is the The Seven Wastes " 7 Mudas"

7 Wastes of Lean Manufacturing

The seven wastes of Lean Manufacturing are what we are aiming to remove from our processes by removing the causes of Mura and Muri as well as tackling Muda directly. But what exactly are the seven wastes of Lean Manufacturing (or 7 Mudas)?

The Seven Wastes of Lean Manufacturing are;

    Transport
    Inventory
    Motion
    Waiting
    Over-Processing
    Overproduction
    Defects

How to Remember the 7 Wastes

There are a couple of Simple Mnemonics that you can use to help you remember the 7 Wastes. The first is to ask your self "Who is TIM WOOD?"
TIMWOOD

    Transport
    Inventory
    Motion
    Waiting
    Over Processing
    Over Production
    Defects

1.The Waste of Transport

Transport is the movement of materials from one location to another, this is a waste as it adds zero value to the product. Why would your customer (or you for that matter) want to pay for an operation that adds no value?

Transport adds no value to the product, you as a business are paying people to move material from one location to another, a process that only costs you money and makes nothing for you. The waste of Transport can be a very high cost to your business, you need people to operate it and equipment such as trucks or fork trucks to undertake this expensive movement of materials.

2.The Waste of Inventory

nventory costs you money, every piece of product tied up in raw material, work in progress or finished goods has a cost and until it is actually sold that cost is yours. In addition to the pure cost of your inventory it adds many other costs; inventory feeds many other wastes.

Inventory has to be stored, it needs space, it needs packaging and it has to be transported around. It has the chance of being damaged during transport and becoming obsolete. The waste of Inventory hides many of the other wastes in your systems.

3.The Waste of Motion

Unnecessary motions are those movements of man or machine which are not as small or as easy to achieve as possible, by this I mean bending down to retrieve heavy objects at floor level when they could be fed at waist level to reduce stress and time to retrieve. Excessive travel between work stations, excessive machine movements from start point to work start point are all examples of the waste of Motion.

All of these wasteful motions cost you time (money) and cause stress on your employees and machines, after all even robots wear out.

4.The Waste of Waiting

How often do you spend time waiting for an answer from another department in your organization, or waiting for a delivery from a supplier or an engineer to come and fix a machine? We tend to spend an enormous amount of time waiting for things in our working lives (and personal lives too), this is an obvious waste.

The Waste of Waiting disrupts flow, one of the main principles of Lean Manufacturing, as such it is one of the more serious of the seven wastes or 7 mudas of lean manufacturing.

5.The waste of Overproduction

The most serious of all of the seven wastes; the waste of overproduction is making too much or too early. This is usually because of working with oversize batches, long lead times, poor supplier relations and a host of other reasons. Overproduction leads to high levels of inventory which mask many of the problems within your organization.

The aim should be to make only what is required when it is required by the customer, the philosophy of Just in Time (JIT), however many companies work on the principle of Just in Case!

6.The Waste of Over-processing

The waste of Overprocessing is where we use inappropriate techniques, oversize equipment, working to tolerances that are too tight, perform processes that are not required by the customer and so forth. All of these things cost us time and money.

One of the biggest examples of over-processing in most companies is that of the "mega machine" that can do an operation faster than any other, but every process flow has to be routed through it causing scheduling complications, delays and so forth. In lean; small is beautiful, use small appropriate machines where they are needed in the flow, not break the flow to route through a highly expensive monstrosity that the accountants insist is kept

7.The Waste of Defects

The most obvious of the seven wastes, although not always the easiest to detect before they reach your customers. Quality errors that cause defects invariably cost you far more than you expect. Every defective item requires rework or replacement, it wastes resources and materials, it creates paperwork, it can lead to lost customers.

The Waste of Defects should be prevented where possible, better to prevent than to try to detect them, implementation of pokayoke systems and autonomation can help to prevent defects from occurring.

Source : lean manufacturing tools

source : You are not allowed to view links. Register or Login