CableDataSheet, Cable and Wire Technical Consulting Service

If you want to build a home solar power system, you must know the step-by-step procedure on how it is done. Building solar panels for your home is not very complicated as long as you know where to look for a guide or a tutorial on how you can do it. You must learn how to wire your You are not allowed to view links. Register or Login carefully for it to work properly and efficiently.

Wiring solar cells includes the following materials: solar cells, pen style soldering gun, 2 gauges of copper wire, plywood, glass, caulk and a UV guard. Depending on what type of cells you have, it can be the one with clear lines or tabbed cells that have metal squares at the block. Both types will work in building home solar panels. All your cells should have the same size to be able to produce the same amount of energy. You should use enough copper wire on your cells and an acid core solder when soldering these copper wires into your cells. These materials are cheap and very easy to use especially with a pen type soldering gun when joining the cells together. You should wire your cells in a series starting and ending with the same polled solar cell. Remember that the front side of the You are not allowed to view links. Register or Login is the negative pole and the back part is the positive pole. Start soldering copper wire in the front so that you will end with the negative pole when you are done.

You need to make sure that the points in your solar cells where you attached the solder and the copper wire is silver, if not, lightly scratch off but you must be very careful as this is the crucial step in getting a solid contact on your solar cells. Having an odd number of cells in a series is normal, what you start with is what you end with. The positive and negative wired series should be on opposite sides of your panel to avoid the wires from touching each other accidentally. This is how the wiring should be when you want to build a solar panel, and now that you know the steps in wiring, you can now start building home solar power systems.

Remember that you need to choose or buy the same type of cells that you will be using to be able to collect an equal amount of You are not allowed to view links. Register or Login. Do not use the soldering iron way too high as it may burn the cells and do not leave the iron on the solar cells for too long. Use as much guides as possible if you are unsure on how to do the wiring of your solar cells. Always remember that solar cells are very fragile that is why you should handle them with extra care to avoid from damaging it. This is to avoid any incident or mistake in wiring and to be able to make a very efficient solar panel for your home.

You are not allowed to view links. Register or Login