CableDataSheet, Cable and Wire Technical Consulting Service

Design Techniques for EMC

By Eur Ing Keith Armstrong CEng MIEE MIEEE Partner, Cherry Clough Consultants, Associate of EMC-UK

This is the first in a series of six articles on best-practice EMC techniques in electrical/electronic/mechanical hardware design, to be published in this journal over the following year. The series is intended for the designer of electronic products, from building block units such as power supplies, single-board computers, and "industrial components" such as motor drives, through to stand-alone or networked products such computers, audio/video/TV, instruments, etc.
These articles were first published in the EMC Journal as a series during 1999. This version includes a number of corrections, modifications, and additions, many of which have been made as a result of correspondence with the following, to whom I am very grateful: Feng Chen, Kevin Ellis, Neil Helsby, Mike Langrish, Tom Liszka, Alan Keenan, T Sato, and John Woodgate. I am also indebted to Tom Sato for translating these articles into Japanese and posting them on his website: You are not allowed to view links. Register or Login, as well as suggesting a number of improvements.

Register to see link

You are not allowed to view links. Register or Login